我要啦免费统计

NSSHKCGEOEU Coal Cutter Cable 0.6/1KV

  • NSSHKCGEOEU Coal Cutter Cable 600 1000V
  • APPLICATION OVERVIEW
    These NSSHKCGEOEU cables are intended for the connection of mobile machines under very high mechanical loads, predominantly for mining applications, e.g. for coal cutting machines, particularly suitable for extreme bending loads under low tensile stress.


    Category: .Tags: , , , .

Description

NSSHKCGEOEU Coal Cutter Cable 0.6/1KV

NSSHKCGEOEU Coal Cutter Cable 0.6/1KV Application

These NSSHKCGEOEU cables are intended for the connection of mobile machines under very high mechanical loads, predominantly for mining applications, e.g. for coal cutting machines, particularly suitable for extreme bending loads under low tensile stress.

This NSSHKCGEOEU cable is used as power supply connection cable for mobile equipment in underground machine applications, such as coal shearer, road header, TBM`s or scoops (LHDs). (Z)-Coal-Cutter cables are designed for free trailing operation and due to their special construction may be trailed for considerable distances behind the machine during operation.

The cable complies with the requirements of the Draft DIN VDE Test Standard 0472 Part 818 “Behaviour under Squeezing Stress”. It ensures that damage caused by squeezing is detected as earth faults with the highest possible reliability.

These NSSHKCGEOEU cables comply with DIN VDE 0250 part 812 Standards.

NSSHKCGEOEU Coal Cutter Cable 0.6/1KV Construction

NSSHKCGEOEU Coal Cutter Cable 600 1000V Construction
NSSHKCGEOEU Coal Cutter Cable 600 1000V Construction
Conductor Particularly fine stranded copper conductor, tinned, Class 5 (refer also to DIN VDE 0295)
Separator Polyester tape
Insulation: heat-resistant Compound 3GI3 rubber compound on EPR basis with particularly high mechanical strength, colored
Pilot core copper/steel conductors capable of expansion and compression and insulating covering of EPR basis 3GI3.
Core arrangement Three main cores laid-up, with double-concentric control/monitoring conductor elements in the outer interstice; length of lay approx. 6 x D
Inner sheath Vulcanized rubber inner sheath; basic material EPR, compound type: GM1b
Reinforcement/Armoring Steel wire braid
Outer sheath basic material PCP, compound type: 5GM5, color yellow, abrasion, and tear resistant, oil resistant and flame retardant

NSSHKCGEOEU Coal Cutter Cable 0.6/1KV Technical Data

Rated Voltage Uo/U (Um) 0.6/1 kV
Max. conductor temperature in service 90°C
Max. short-circuit temperature of conductor: 250°C
Limit surface temperature fixed installed -40°C~ 80°C
Limit surface temperature, flexible application -25°C ~ 80°C
Oil resistance Yes, DIN VDE 0473, part 811-2-1, par. 10,
EN 60811-2-1, IEC EN 60811-1-2
Flame retardant Yes, DIN VDE 0482, EN/IEC 60332-1-2
Dynamic bending radius 4(xD)
Static bending radius 1.5(xD)
Weather resistance Unrestricted use outdoors and indoors, resistant to ozone and moisture

NSSHKCGEOEU Coal Cutter Cable 0.6/1KV Specification

No. of cores x
cross section
Max Conductor
diameter
Outer diameter
min.
Outer diameter
max
Cable weight
approx.
Tensile
strength
n x mm2 mm mm mm kg/km N
3×25+3x(1,5STKON +16/3KON) 7.1 39.2 42.2 2700 3000
3×35+3x(1.5STKON+16/3KON) 8.4 40.8 43.8 3100 4200
3×50+3x(1.5ST KÖN+25/3 KON) 10.1 46.2 49.2 4000 5000
3×70+3x(1.5ST KÖN+35/3KON) 11.9 49.6 53.6 5100 8400
3×95+3x(1,5STKON +50/3KON) 14 56.8 60.8 5700 14440
3×120+3x(1,5STKON +70/3KON) 15.5 60.6 64.6 8100 18000
3×150+3x(1,5STKON +70/3KON) 17.6 67 71 9600 18000
3×185+3x(1,5STKON +95/3KON) 19.1 72 76 11500 22000
3×240+3x(1,5STKON +120/3KON) 22 80.4 85.4 14600 28800
3×300+3x(1,5STKON +150/3KON) 24.8 89.1 94.1 18700 36000

Reviews

There are no reviews yet.

Be the first to review “NSSHKCGEOEU Coal Cutter Cable 0.6/1KV”

This site uses Akismet to reduce spam. Learn how your comment data is processed.


Related Products