NSSHCGEOEU Longwall Coal Cutter Cable(Low Tensile Stress)0.6/1KV

APPLICATION
These NSSHCGEOEU cables are used for the connection of mobile machines, predominantly in mining applications,e.g. for coal-cutting machines, suitable for extreme bending loads under low tensile stress.

Category: Mining Cable.Tags: 0.6/1KV, Coal Cutter Cable, Longwall Cable, Mining Cables, NSSHCGEOEU, NSSHCGEÖU.

Description

NSSHCGEOEU Longwall Coal Cutter Cable(Low Tensile Stress)0.6/1KV

NSSHCGEOEU Coal Cutter Cable 0.6/1KV Application

NSSHCGEOEU Coal Cutter Cables are used for the connection of mobile machines under extremely high mechanical loads, predominantly in mining situations,e.g. for coal-cutting machines, suitable for extreme bending loads under low tensile stress.

The phase-concentric monitoring shield and the common concentric earth conductor, in conjunction with appropriate monitoring equipment, make it possible to monitor the cable for insulation faults and damage resulting from external influences. The cable can be delivered with 2, 3 or 6 pilot cores.

These NSSHCGEOEU cables comply with DIN VDE 0250 part 812 Standards.

NSSHCGEOEU Low Tensile Stress Coal Cutter Cable 0.6/1KV Construction

Conductors	Flexible stranded tinned copper conductor.
Insulation	Heat resistant 3GI3 rubber based on EPR.
Outer Conductor Layer	Easy strippable outer conductive layer.
Pilot Cores	Copper strand and steel braid conductor capable of expansion and compression with EPRrubber insulation.
Monitoring Conductor	Spiral of tinned copper wires above the pilot cores, covered with a semi-conductive tape.
InnerSheath	Rubber type GM1b.
Armor/Earth Conductor	Concentric earth conductor as the spiral of copper and steel wires, fiberglass tape, embedded in the outer sheath which prevents sheath exchanging.
Outer Sheath	Rubber type 5GM5, abrasion, and tear resistant, oil resistant and flame retardant.

NSSHCGEOEU Low Tensile Stress Coal Cutter Cable 0.6/1KV Technical Data

Rated Voltage Uo/U (Um)	0.6/1 kV
Max. conductor temperature in service	90°C
Max. short-circuit temperature of conductor:	200°C
Limit surface temperature fixed installed	-40°C~ 80°C
Limit surface temperature, flexible application	-25°C ~ 80°C
Oil resistance	Yes
Flame retardant	Yes
Dynamic bending radius	4(xD)
Static bending radius	1.5(xD)

NSSHCGEOEU Low Tensile Stress Coal Cutter Cable 0.6/1KV Specifications

Number of Cores× Nominal Cross Section	Minimium Overall Diameter	Maximum Overall Diameter	Nominal Weight
No.×mm²	mm	mm	kg/km
3×16/16KON+2ST+UEL	35	38	2130
3×25/16KON+2ST+UEL	38	41	2790
3×35/16KON+2ST+UEL	41	45	3390
3×50/25KON+2ST+UEL	47	51	4340
3×70/35KON+2ST+UEL	52	56	5680
3×95/50KON+2ST+UEL	58	62	7180
3×25/16KON+3×(1.5ST+UEL)	38	41	2920
3×35/16KON+3×(1.5ST+UEL)	41	45	3630
3×50/25KON+3×(1.5ST+UEL)	45	48	4500
3×70/35KON+3×(1.5ST+UEL)	48	53	5850
3×95/50KON+3×(1.5ST+UEL)	52	56	7400
3×120/70KON+3×(1.5ST+UEL)	58	63	8300
3×150/70KON+3×(1.5ST+UEL)	62	68	9300